Name: BIO-SEED®
Brand: 4Sight
SKU: bio-seed
Availability: InStock

Question 1

What is Bio-Seed and how is it used in effluent management?

Accepted Answer

Bio-Seed is a formulation that stimulates biological reactions and the production of substrates to neutralise odour and metabolise odour-generating substances. It is designed for long-term, program-based odour management and can be used with Bio-Starter.

Question 2

Can Bio-Seed help manage odours in effluent and wastewater?

Accepted Answer

Yes. Bio-Seed is formulated to stimulate biological reactions and the production of substrates that neutralise odour and metabolise odour-generating substances. Long-term, program-based odour management is specifically identified as a product use.

Question 3

Can Bio-Seed help manage hydrogen sulphide and mercaptan odours?

Accepted Answer

The product information specifically states that Bio-Seed is used with Bio-Starter to neutralise odour and metabolise odour substances including hydrogen sulphide and mercaptans.

This makes hydrogen sulphide and mercaptans particularly relevant to Bio-Seed's documented use in odour management.

Question 4

Why are Bio-Seed and Bio-Starter used together?

Accepted Answer

The Bio-Seed directions specify its use with Bio-Starter for odour management, including odour substances such as hydrogen sulphide and mercaptans. For regular application to a wastewater stream or pipe, Bio-Seed and Bio-Starter are used at a 1:1 ratio.

Question 5

How is Bio-Seed dosed into a wastewater or effluent stream?

Accepted Answer

For regular application to a wastewater stream or pipe, dilute Bio-Seed 1:10 with water and use it at a 1:1 ratio with Bio-Starter. Apply using a dosing pump or similar metered dosing equipment. The specified Bio-Seed application rate is 1 L/day where flow volume is below 10,000 L/day and 4 L/day where flow volume is above 10,000 L/day. Application should be directed to a quiescent zone where water flow slows as it passes through an area of installed media.

Question 6

How is Bio-Seed applied to wastewater, collected liquid or effluent ponds?

Accepted Answer

For wastewater or collected liquid, apply 1 L of Bio-Seed per 20,000 L of liquid volume, diluted 3:100 with water. Spray onto the surface of the liquid using a coarse spray to help carry the product to the liquid surface. Aim for even coverage, with particular attention to entry and exit zones, pond or collection-area banks, and deposition zones in the water.

Question 7

Can Bio-Seed be applied to collected non-liquid effluent material?

Accepted Answer

Yes. Bio-Seed has application directions for collected non-liquid material or treatment areas. Apply 1 L per 1,000 m², diluted 3:100 with water, to the surface of the material being treated.

Use a fine spray where available but do not aerosolise. Proximity to the material being treated and even coverage are identified as important to product effectiveness.

Question 8

How should Bio-Seed be stored?

Accepted Answer

Store Bio-Seed in a shaded place until ready for use and do not freeze. Keep the container closed and free from debris when not in use, and do not shake. Bio-Seed is a fermented product, so its colour and odour may vary during storage.

BIO-SEED®

Description

Pack Sizes

Categories

Tags

Frequently Asked Questions

Ready to work with us?